Carpet Barrier™ 36" x 200'
Carpet Barrier™
$69.95
(No reviews yet)
Write a Review
Carpet Barrier™
Carpet Barrier™ 36" x 200'
Carpet Barrier™ is industry-grade 2.5 mil self-adhesive carpet protection film.
No more struggling with sticky film! Add a 36" Xcel Strip™ film applicator for only a few dollars more.
- 36" x 200' roll is reverse-wound for easy application.
- Protects carpets from spills, staining, paint, plaster, oil, grease, traffic and tracked dirt.
- Gentle, low-tack adhesive on bottom keeps it in place.
- Film removes easily, with no residue or damage to carpet.
- For use with synthetic carpets only.
- Can be kept in place for up to 45 days.
- Keep your carpet clean and mess-free during construction, remodeling, home showings, open houses, parties and more!
Technical Specs
- 2.5-mil film
- Gentle, low-tack self-adhesive
- Uncolored to distinguish from Floor Barrier™
- For use on synthetic carpet ONLY
GUIDELINES FOR USE
- NEVER exceed 45 days of use.
- Use on SYNTHETIC CARPETS ONLY. Wool or oriental carpets could be damaged.
- Carpet should be CLEAN AND DRY before use. If carpet was recently cleaned, all 72 HOURS for carpeting to dry and cleaning agents to dissipate.
- For newly installed carpet, allow 14 DAYS for adhesive vapors to dissipate before covering.
- DO NOT APPLY TO HARD FLOOR SURFACES! Hardwood, vinyl, ceramic tile, linoleum, marble, laminates, tubs, and countertops may be damaged by the adhesive, Carpet Barrier™ is too sticky for these surfaces. Use Floor Barrier™ for floors.
- Take care not to let Carpet Barrier™ overlap beyond carpeted areas to hard floor surfaces, trim, or walls.
- Not suitable for outdoor use.
- Do not apply if temperatures are or will be under 40° F or above 100° F.
- Product should be stored in a dry place not below 40° F or above 100° F.
- User determines suitability.
