Carpet Barrier™ 24" x 200'

Carpet Barrier™ is industry-grade 2.5 mil self-adhesive carpet protection film and available in four sizes.

No more struggling with sticky film! Add a 24" Xcel Strip™ film applicator for only a few dollars more.

• 24" x 200' roll is reverse-wound for easy application.
• Protects carpets from spills, staining, paint, plaster, oil, grease, traffic and tracked dirt.
• Gentle, low-tack adhesive on bottom keeps it in place.
• Film removes easily, with no residue or damage to carpet.
• For use with synthetic carpets only.
• Can be kept in place for up to 45 days.
• Keep your carpet clean and mess-free during construction, remodeling, home showings, open houses, parties and more!

Technical Specs

• 2.5-mil film
• Gentle, low-tack self-adhesive
• Uncolored to distinguish from Floor Barrier™
• For use on synthetic carpet ONLY

GUIDELINES FOR USE

• NEVER exceed 45 days of use.
• Use on SYNTHETIC CARPETS ONLY. Wool or oriental carpets could be damaged.
• Carpet should be CLEAN AND DRY before use. If carpet was recently cleaned, all 72 HOURS for carpeting to dry and cleaning agents to dissipate.
• For newly installed carpet, allow 14 DAYS for adhesive vapors to dissipate before covering.
• DO NOT APPLY TO HARD FLOOR SURFACES! Hardwood, vinyl, ceramic tile, linoleum, marble, laminates, tubs, and countertops may be damaged by the adhesive, Carpet Barrier™ is too sticky for these surfaces. Use Floor Barrier™ for floors.
• Take care not to let Carpet Barrier™ overlap beyond carpeted areas to hard floor surfaces, trim, or walls.
• Not suitable for outdoor use.
• Do not apply if temperatures are or will be under 40° F or above 100° F.
• Product should be stored in a dry place not below 40° F or above 100° F.
• User determines suitability.